Power
Showing 1–12 of 16 results

AS-6M (300B) PP
- Rugged stainless steel chassis
- High quality EI transformers and components
- Switching between high and low negative feedback
- Switching between line and direct input
- Innovative tube circuitry with choke coil
- Point to point soldering
- Mirror image pair

AS-6M (300B) SE
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering

AS-6M (KT88)
- Rugged stainless steel chassis
- High quality EI transformers and components
- Switching between ultra-linear and triode
- Switching between line and direct input
- Innovative tube circuitry with choke coil
- Point to point soldering
- Mirror image pair

AS-9 MKIII (EL-34)
Mono Block Tube Power Amplifier | |
Input Impedance | 100KΩ (RCA) |
Output Impedance | 4Ω,8Ω |
Output Power | 75W/CHANNEL CLASS AB P-P(ULTRALINEAR) |
38W/CHANNEL CLASS AB P-P(TRIODE) | |
Damping Factor | >5 |
Frequency Response | 28Hz-40KHz ±0.5dB |
T.H.D. | <0.8% 20Hz-20KHz (REF. OUTPUT) |
Total Gain | 26dB |
Input Sensitivity | 600mV-2V |
S/N ratio | >96dB (HUM NOISE <2mV/8 Ω) |
Channel Balance | <1dB 20Hz-20KHz (MAX. VOLUME) |
Phase Mode | NORMAL(0°)/REVERSE(180°) |
Vacuum Tubes /Ch. | EL-34(6CA7)×4 |
6DJ8(ECC-88 OR 6922) ×2 | |
6CG7(6N6)×1 | |
Weight | N.W.:18.5kg / G.W.:19kg |
Dimension (D×W×H) | 425mm × 290mm × 195mm |

MP-1B
Mono Block Tube Power Amplifier Input Impedance 68KΩ (RCA) Output Impedance 4, 8 Ω Output Power 21W (CLASS A PUSH-PULL) Frequency Response 20Hz~20kHz±1dB T.H.D. <1% 20Hz-20kHz (REF. OUTPUT) Input Sensitivity 600mV~940mV S/N ratio >89dB (HUM NOISE<1mV) Channel Balance <1dB 20Hz-20KHz … Continued

Reference 1
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering

Reference 3 (805)
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering

Reference 3 (845)
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering

Reference 3.1 (300B)
- Rugged stainless steel chassis
- High quality EI transformers and components
- Switching between direct and line input
- Switching between high and low negative feedback
- Tube moving magnet phono stage
- Innovative tube circuitry with choke coil
- Point to point soldering