| Mono Block Tube Power Amplifier | |
| Output Impedance | 0,4,8,16 Ω |
| Output Power | 75W(TRIODE-CLASS A PUSH-PULL) |
| Frequency Response | 20Hz-20KHz ±1dB |
| T.H.D. | <1% 20Hz-20KHz (REF. OUTPUT) |
| Input Sensitivity | 600mV |
| Input Impedance | 60K Ω (RCA/BALANCE) |
| S/N ratio | >80dB (HUM NOISE<1mV) |
| Channel Balance | <1dB (20Hz-20KHz) |
| Vacuum Tubes | 1×6N9P(6SL7 or ECC35) /Channel |
| 1×6N8P(6SN7 or ECC32) /Channel | |
| 2×300B,2×845 /Channel | |
| Weight | N.W.:55Kg / G.W.:71Kg |
| Dimension (D×W×H) | 660×495×285mm |
Stereo Tube Preamplifier Output 2V (8V P-P max) Frequency response 10Hz~100kHz±1dB T.H.D. ＜0.02%（20Hz~20kHz） S/N ratio ＞96dB Channel Balance <1dB Channel Separation >76dB Input Impedance 250kΩ(RCA) Output Impedance ＜1.5KΩ Input sensitivity 50mV~100mV Vacuum Tubes 12AX7（ECC-83/5751）×2 12AU7 (ECC-82/6189) ×1 Weight 6 kg … Continued
| Stereo Tube Integrated Amplifier | |
| Input Impedance | 250Kohm (RCA) |
| Output Impedance | 4, 8 Ω |
| Output Power | 55W×2 /CLASS AB2 P-P(ULTRALINEAR) *70W×2 MAX. |
| 28W×2 /CLASS AB2 P-P(TRIODE) *38W×2 MAX. | |
| Damping Factor | > 5 |
| Frequency Response | 20Hz-30KHz ±1dB |
| T.H.D.: | < 1% 20Hz-20KHz (REF. OUTPUT) |
| Total Gain | 29dB |
| Input Sensitivity | 300mV-600mV |
| S/N Ratio | > 93dB (HUM NOISE <3mV) |
| Channel Balance | < 1dB 20Hz-20KHz (MAX. VOLUME) |
| Channel Sepration | > 65dB 1KHz-3.3KHz |
| Vacuum Tube | V1,V2,V3,V4: EL-34(6CA7)×4 |
| V7: 12AX7(ECC-83,5751,4004) ×1 | |
| V5,V6: 12AU7(ECC-82,6189,4003)×2 | |
| Dimension (L × W × H) | 410mm × 320mm × 190mm |
| Weight | N.W.:18kg |
Stereo Tube Integrated Amplifier Input Impedance >100Kohm (RCA) Output Impedance 4, 8 Ω Output Power 32W×2 /CLASS AB2 P-P(ULTRALINEAR) *40W×2 MAX. 16W×2 /CLASS AB2 P-P(TRIODE) *22W×2 MAX. Damping Factor >5 Frequency Response 20Hz-30KHz ±1dB T.H.D.: <1% 20Hz-20KHz (REF. OUTPUT) Total … Continued
