Back to Power Amplifier
M-9SE (EL34)
Related Products
Line-3
Stereo Tube Preamplifier Output 2V (8V P-P max) Frequency response 10Hz~100kHz±1dB T.H.D. ＜0.02%（20Hz~20kHz） S/N ratio ＞96dB Channel Balance <1dB Channel Separation >76dB Input Impedance 250kΩ(RCA) Output Impedance ＜1.5KΩ Input sensitivity 50mV~100mV Vacuum Tubes 12AX7（ECC-83/5751）×2 12AU7 (ECC-82/6189) ×1 Weight 6 kg … Continued
Reference 5 / Power One (KT88)
Balanced Class A-B P-P Mono Block Tube Power Amplifier Output Impedance: 4,8,16 Ω Output Power: Trode-50W/Ch. Ultraline-90W/Ch. Input Mode: RCA or Balanced Input Impedance: RCA>100K Ω, Bal-600-22K Ω Frequency Response: 20Hz-20KHz ±1dB T.H.D.: <5% 20Hz-20KHz (Ref. Output) S/N ratio: >87dB … Continued
Reference 3 (805)
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering
AS-9 MKIII (EL-34)
| Mono Block Tube Power Amplifier | |
| Input Impedance | 100KΩ (RCA) |
| Output Impedance | 4Ω,8Ω |
| Output Power | 75W/CHANNEL CLASS AB P-P(ULTRALINEAR) |
| 38W/CHANNEL CLASS AB P-P(TRIODE) | |
| Damping Factor | >5 |
| Frequency Response | 28Hz-40KHz ±0.5dB |
| T.H.D. | <0.8% 20Hz-20KHz (REF. OUTPUT) |
| Total Gain | 26dB |
| Input Sensitivity | 600mV-2V |
| S/N ratio | >96dB (HUM NOISE <2mV/8 Ω) |
| Channel Balance | <1dB 20Hz-20KHz (MAX. VOLUME) |
| Phase Mode | NORMAL(0°)/REVERSE(180°) |
| Vacuum Tubes /Ch. | EL-34(6CA7)×4 |
| 6DJ8(ECC-88 OR 6922) ×2 | |
| 6CG7(6N6)×1 | |
| Weight | N.W.:18.5kg / G.W.:19kg |
| Dimension (D×W×H) | 425mm × 290mm × 195mm |