Back to Integrated Amplifier
AS-6i REB
Related Products
Line-3.1
Stereo Tube Preamplifier Output 2V (18V Max.) Frequency response 10Hz~200kHz±0.5dB T.H.D. ＜0.02%（20Hz~20kHz/2V output） S/N ratio ＞96dB Channel Balance ＜1dB Channel Separation ＞62dB Input Impedance 250kΩ(RCA) Output Impedance ＜2.5K Ω Input sensitivity 50mV~100mV Vacuum Tubes 12AU7 (ECC-82/6189) ×2 12AX7 (ECC-83/5751) ×2 Weight 6 kg … Continued
AS-8i
| Stereo Tube Integrated Amplifier | |
| Input Impedance | 250Kohm (RCA) |
| Output Impedance | 4, 8 Ω |
| Output Power | 55W×2 /CLASS AB2 P-P(ULTRALINEAR) *70W×2 MAX. |
| 28W×2 /CLASS AB2 P-P(TRIODE) *38W×2 MAX. | |
| Damping Factor | > 5 |
| Frequency Response | 20Hz-30KHz ±1dB |
| T.H.D.: | < 1% 20Hz-20KHz (REF. OUTPUT) |
| Total Gain | 29dB |
| Input Sensitivity | 300mV-600mV |
| S/N Ratio | > 93dB (HUM NOISE <3mV) |
| Channel Balance | < 1dB 20Hz-20KHz (MAX. VOLUME) |
| Channel Sepration | > 65dB 1KHz-3.3KHz |
| Vacuum Tube | V1,V2,V3,V4: EL-34(6CA7)×4 |
| V7: 12AX7(ECC-83,5751,4004) ×1 | |
| V5,V6: 12AU7(ECC-82,6189,4003)×2 | |
| Dimension (L × W × H) | 410mm × 320mm × 190mm |
| Weight | N.W.:18kg |
Reference 5 / Power One (300B)
| Balanced Class A P-P Mono Block Tube Power Amplifier | |
| Output Impedance: | 4,8,16 Ω |
| Output Power: | 60W/Ch. |
| Input Mode: | RCA or Balanced |
| Input Impedance: | RCA>100K Ω, Bal-600-22K Ω |
| Frequency Response: | 20Hz-20KHz ±1dB |
| T.H.D.: | <5% 20Hz-20KHz (Ref. Output) |
| S/N ratio: | >87dB (Hum Noise<2mV) |
| Vacuum Tubes: | 300Bx4 /Ch |
| 6N9P(6SL7)x2 /Ch | |
| 12AX7(ECC83)x1 /Ch | |
| 12AU7(ECC82)x3 /Ch | |
| Weight: | 31.5kg (N.W.)/ 37.5kg (G.W) |
| Dimension (D x W x H): | 475 x 405 x 215 mm |
Reference 1
- Rugged and beautiful stainless steel chassis with aluminum heat sinks
- High quality EI transformers and components
- Switching between high and low negative feedback
- Innovative tube circuitry with choke coil
- Point to point soldering